Brakes, suspension, and track‑day prep in Vaughan.
Brake and suspension builds planned with you, installed properly, and set up for the way you drive.
Book a consultExample build: track‑day brake package
A typical first build for a customer moving from street driving to their first track days.
- Front rotors
- 355 mm, 2-piece
- Calipers
- 6-piston front
- Pads
- Track compound
- Fluid
- High-temp DOT 4
- Lines
- Stainless braided
- Install time
- 1 day
- Parts and labour
- From $3,400
Work we do
- Build consult$7545 minutes
Goals, budget, and a written parts plan. Credited to your build.
- Big brake kit installFrom $6501 day
Labour only. Bedded in and torqued to spec.
- Coilover install and setupFrom $7501 to 2 days
Ride height, damping baseline, and alignment.
- Performance alignment$1802 hours
Camber, caster, and toe set to your plan.
- Track-day inspection$14090 minutes
Brakes, fluids, wheels, and a signed sheet for event tech.
- Brake fluid flush, high-temp$1501 hour
On the lift
Rotor and hub, wheel off 
Race hub assembly 
Big brake kit, fitted
Before your build
- Written parts plan
- Every build starts with a consult and a written plan: parts, labour, and total, before anything is ordered.
- Customer-supplied parts
- We install parts you bring, but we can only warranty labour on them.
- Deposits
- Parts over $500 need a 50% deposit when ordered. It comes off your final invoice.
- Warranty
- Parts and labour are covered for at least 90 days or 5,000 km, the Ontario minimum. Track use can void part warranties; we tell you which.
The shop
Kestrel Motorworks is a two-bay shop for people who drive their cars hard: track days, autocross, and spirited weekends. Every build starts with a consult and a written plan.
We install what we'd put on our own cars, and we tell you when a part isn't worth the money.
Questions
Do you do engine tuning?
No. We focus on brakes, suspension, wheels, and track prep, and send tuning to specialists we trust.
Is this only for track cars?
No. Plenty of our customers just want better brakes and handling on the road.
How long does a typical build take?
Most brake or suspension builds are one to two days once parts are in.
Hours and location
- Tuesday to Friday
- to
- Saturday
- to
Consults by appointment. Closed Sunday and Monday.
Unit 12, 90 Kestrel Court, Vaughan, ON L4K 0C7905-555-0191
builds@example.com
Start with a consult. Bring your goals and your budget.
Book a consult